View BNC-P-3C-CR10-BOOT_4456556.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BNC Series
BNC Type Connectors
BNC series is most widely used as 50 coaxial
cable connectors.
This series is used specially for interface of fre-
quent fit-in/pull-out instruments by small size/ light weight bayonet lock mechanism. Note: BNC series is intermateable with BNC75 series. (75 group) If 75 cable is used for this series, the frequency to be applied must be below 200MHz. For more than 200MHz, BNC75 series must be used.
CONFORMING STANDARD
JIS-C-5412 MIL-C-39012 DSP-C-6202 NTTSpec No.2095
SPECIFICATION
Characteristic Impedance Dielectric withstanding voltage Insulation resistance Contact resistance VSWR 50 1500V AC (rms) for 1 minute 1000Mmin. at 500V DC 3m max. 1.3max. at DC2GHz
Specifications depends on each connector although these are basic specifications.
MATERIAL/FINISH
Shell (Body) Contact (male) Contact (female) Insulators Gaskets Copper alloy/Silver or Nickel plating Copper alloy/Silver or Gold plating Copper alloy/Silver or Gold plating PTFE Silicone rubber
Please ask us for the cable assemblies to assure its performance.
1
BNC Series
Unit : mm
Plug Clamp Type
14.5 A
P/N BNC-P-3
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-62/U RG-62/U RG-59/U RG-62/U RG-59/U RG-62/U
A 6.4 6.4 6.4 5.4 5.4 6.6 6.6 6.55 6.55
L 25.0 25.0 25.0 27.0 27.0 26.2 26.2 24.6 24.6
Finish Shell Ag Ni Ni Ag Ni Ag Ni Ag Ni Contact Ag Ag Au Ag Ag Ag Ag Ag Ag
L
BNC-P-3-Ni BNC-P-3-NiCAu BNC-P-58U BNC-P-58U-Ni BNC-P-62U BNC-P-62U-Ni UG-260/U UG-260/U-Ni
P/N
14.5 A
Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W 3C-2T 3C-2T
A 7.1 7.1 8.0 8.0
(L) 29.1 29.1 30.0 30.0
Finish Shell Ag Ni Ag Ni Finish Shell Ag Ni Ag Ni Ni Ni Ag Ag Ni Contact Ag Ag Ag Ag Ag Ag Ag Ag Ag Contact Ag Ag Ag Ag
BNC-P-3W BNC-P-3W-Ni-1 BNC-P-3CT BNC-P-3CT-Ni
(L)
17.5
14.5
P/N BNC-P-5
A
Applicable Cable 5D-2V 5C-2V 5D-2V 5C-2V 5D-2W 5C-2W 5D-2W 5C-2W 5C-FB 5D-FB 5C-2T 7C-2V 7C-2V
A 8.6 8.6 9.2 9.2 8.6 8.1 10.1 11.25 11.25
(L) 37.0 37.0 37.0 37.0 37.0 39.0 37.0 37.0 37.0
(L)
BNC-P-5-Ni BNC-P-5W BNC-P-5W-Ni BNC-P-5CFB BNC-SP-5DFB BNC-P-5C2T BNC-P-7 BNC-P-7-Ni
2
BNC Series
Unit : mm
Plug Crimp Type
Applicable Cable 1.5D-2V 1.5C-2V 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V 2.5D-2V 2.5C-2V RG-179/U RG-179/U 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V RG-188A/U RG-174/U Finish Shell Ag Ni Ag Ni Ag Ni Ni Ni Ni Ni Contact Ag Ag Ag Ag Ag Ag Au Au Au Au Finish Shell Ni Ni Ni Ni Ni Ni Ni Ni Ni Finish Shell Ag Ni Ni Ni Contact Ag Ag Au Au Contact Au Au Au Au Au Au Ag Au Au Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100
14.5
P/N BNC-P-1.5V-CR
A 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
A
(31.7)
BNC-P-1.5V-CR-Ni BNC-P-2.5V-CR BNC-P-2.5V-CR-Ni BNC-P-179U-CR BNC-P-179U-CR-Ni BNC-P-1.5V-CR-NiCAu BNC-P-2.5V-CR-NiCAu BNC-P-188A/U BNC-P-174U-CR
14.5
P/N BNC-P-1.5CQEW-CR10 BNC-P-1.5D-CR10 BNC-P-3C-CR10-BOOT BNC-P-3D-CR10-BOOT BNC-P-58U-CR10 BNC-SP-1.5DW-CR1 BNC-SP-1.5D2W-CR10-1 BNC-P-1.5D2W-CR10-201 BNC-P-3D-CR10
A
Applicable Cable 1.5C-QEW 1.5D-XV 1.5D-QEV 3C-2V 3D-2V RG-58/U RG-58A/U 1.5D-QEW 1.5D-QEW 1.5D-2W 1.5D-QEW 3D-2V
A 5.5 4.0 7.1 7.1 6.3 4.8 5.5 5.5 7.1
L 24.3 23.3 24.3 24.3 24.3 29.2 24.0 24.3 24.3
Hand Crimp Tool P/N CR-H-1100 CR-H-1120 CR-H-1116 CR-H-1116 CR-H-1115 CR-H-1156 CR-H-1100 CR-H-1100 CR-H-1116
Note Deltamate Deltamate Deltamate Deltamate Deltamate
L
P/N
14.5 A
Applicable Cable 3C-2V 3C-2V 5C-2V 5C-2V
A 7.0 7.0 9.5 9.5
(L) 28.0 28.0 28.7 28.7
Hand Crimp Tool P/N CR-H-1102 CR-H-1102 CR-H-1130 CR-H-1130
Note boot (W) boot (B)
BNC-P-3C-CR1 BNC-P-3C-CRI-Ni BNC-P-5C-CR10 BNC-P-5C-CR10-B
(L)
3
BNC Series
Unit : mm
Right Angle Plug Clamp Type
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 5D-2V 5C-2V 5D-2V 5C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U Finish Shell Ag Ag Ni Ni Ag Ni Ag Ni Ag Contact Ag Au Au Ag Ag Ag Ag Ag Ag
25
P/N BNC-LP-3
A 33
A 6.4 6.4 6.4 6.4 8.6 8.6 5.38 5.38 5.4
BNC-LP-3-CAu BNC-LP-3-NiCAu BNC-LP-3-Ni BNC-LP-5 BNC-LP-5-Ni BNC-LP-58U BNC-LP-58U-Ni BNC-LP-55U
27
P/N BNC-LP-5
33
Applicable Cable 5D-2V 5C-2V 5D-2V 5C-2V
Finish Shell Ag Ni Contact Ag Au
BNC-LP-5-Ni
33 14.3
P/N BNC-LP-5D2W
Applicable Cable 5D-2V 5C-2V
Finish Shell Ni Contact Au
40
17.5
4
BNC Series
Unit : mm
Jack Clamp Type
A
P/N BNC-J-3 BNC-J-3-Ni BNC-J-58U BNC-J-62U UG-261/U
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-59/U RG-62/U RG-59/U RG-62/U
A 6.4 6.4 5.4 6.55 6.6
(L) 28.5 28.5 28.6 28.6 28.6
Finish Shell Ag Ni Ag Ag Ag Contact Ag Ag Ag Ag Ag
(L)
17.5
P/N
15.8 38.0
Applicable Cable 5D-2V 5C-2V
Finish Shell Ag Contact Ag
BNC-J-5
Crimp Type
Applicable Cable 2.5D-2V 2.5C-2V 1.5D-2V 1.5D-QEV RG-55/U RG-58/U Finish Shell Ag Ag Ag Contact Ag Ag Ag Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1105
A
P/N BNC-J-2.5-CR
34.5
A 5.5 5.5 6.3
BNC-J-1.5V-CR BNC-J-58U-CR1
5
BNC Series
Unit : mm
Panel Jack Clamp Type
4-B
P/N
17.5 12.7 A
Applicable Cable 3D-2V 3C-2V 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U
A 6.4 6.4 5.4 5.4 5.4 6.55
L 28.5 28.5 27.0 27.0 27.0 28.6
B 3.0 3.0 3.0 3.0 3.0 3.0
Finish Shell Ag Ni Ag Ni Ni Ag Contact Ag Ag Ag Ag Au Ag
BNC-PJ-3 BNC-PJ-3-Ni BNC-PJ-58U BNC-PJ-58U-Ni BNC-PJ-58U-NiCAu BNC-PJ-62U
2.3
15.8 (L)
12.7
Mounting Hole
4-3.0 -0
+0.1
11.5 -0
+0.1
12.7 0.05
12.7 0.05
4-3.0
P/N
14.0 13.5
Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W
Finish Shell Ag Ni Contact Ag Ag
BNC-PJ-3W
2.3 15.8 (31.0) 13.5 19.0
BNC-PJ-3W-Ni-1
Mounting Hole
4-M2.6 x 0.45
14.5 -0
+0.1
13.5 0.05
13.5 0.05
4-3.2
17.5
18.2
P/N BNC-PJ-5 BNC-PJ-5D2W
Applicable Cable 5D-2V 5C-2V 5D-2W 5C-2W
(L) 38.0 40.6
Finish Shell Ag Ag Contact Ag Ag
2 15.77 (L)
18.2 25.3
Mounting Hole
4-3.2 -0
+0.1
11.5 -0
+0.1
18.2 0.05
18.2 0.05
6
BNC Series
Unit : mm
Panel Jack Crimp Type
4-3.0
P/N
17.5 5.5 12.7
Applicable Cable 1.5D-2V 1.5C-2V 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V 2.5D-2V 2.5C-2V RG-179B/U 1.5D-QEW 1.5D-QEW
Finish Shell Ag Ni Ag Ni Ag Ni Ni Contact Ag Ag Ag Ag Ag Au Ag
Hand Crimp Tool P/N CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100 CR-H-1100
Mounting Hole R R R R R N N
BNC-PJ-1.5V-CR BNC-PJ-1.5V-CR-Ni BNC-PJ-2.5V-CR BNC-PJ-2.5V-CR-Ni
2.3
15.8 12.7
34.5
Mounting Hole R
4-3.0 -0
+0.1
12.7 0.05
11.5 -0
+0.1
BNC-PJ-179BU-CR BNC-PJ-1.5W-CR-DI BNC-PJ-1.5W-CR-Ni
12.7 0.05
Mounting Hole N
4-3.0 -0
+0.1
12.0 -0
+0.1
12.7 0.05
12.7 0.05 4-3.0 12.7 17.5
10 6
P/N BNC-PJ-1.5DW-CR1
Applicable Cable 1.5D-QEW
Finish Shell Ni Contact Au
Hand Crimp Tool P/N CR-H-1156
2.29
15.77
12.7
30.1
Mounting Hole
4-3.0 -0
+0.1
11.5 -0
+0.1
12.7 0.05
12.7 0.05
7
BNC Series
Unit : mm
Receptacle
4-B
P/N
1.4 12.7
B 3.1 3.1 M2.6 M2.6
Finish Shell Ag Ni Ag Ni Contact Ag Ag Ag Ag
BNC-R BNC-R-Ni UG-290/U UG-290/U-Ni-1
2.3
15.8 26.3
12.7 17.5
Mounting Hole
4-3.0 +0.1
-0
9.0
+0.1 -0
12.7 0.05
12.7
12.7 0.05
P/N
4-3.0 17.5 1.1 12.7
Finish Shell Ag Ni Contact Ag Ag
BNC-LR
23.4
BNC-LR-Ni
23
Mounting Hole
4-3.0 +0.1
-0
9.0
+0.1 -0
12.7 0.05
12.7 0.05
15.0
P/N
2.3 2.5 13.3
Finish Shell Ni Contact Ag
Note Locating pins(4pcs):Tinlead plating Locating pins(4pcs):Ag plating Locating pins(4pcs):Tinlead plating
BNC-R-PC-4
PCB Mounting Dimensions
5-1.2
+0.1 -0
0.05
BNC-R-PC-4-Ag
Ni
Ag
BNC-R-PC-4-CAu
10.16 -0
+0.1
Ni
Au
5.08 0.05 10.16 -0
+0.1
5.08
8
BNC Series
Unit : mm
Receptacle
10.16
15.0
10.16
P/N
23.4
Finish Shell Ni Contact Ag
Note Locating pins(4pcs):Tinlead plating
BNC-LR-PC-4
2.5 19.1
PCB Mounting Dimensions
5-1.2 +0.1 -0 5.08 0.05
5.08 0.05 10.16 -0
+0.1
10.16 -0 4-3.0
+0.1
P/N
1.1 12.7
Finish Shell Ag Ni Contact Ag Ag
BNC-PR BNC-PR-Ni
2.3
18.0 28.5 12.7 17.5
Mounting Hole
4-3.2 +0.1
-0
9.0
+0.1 -0
12.7 0.05
12.7 0.05
9
BNC Series
Unit : mm
Bulkhead Receptacle
Hex.12.7
P/N
12.7 1.4
Finish Shell Ag Ni Ni Contact Ag Ag Au
BNC-RB2 BNC-RB2-Ni BNC-RB2-NiCAu
1.5 12.6 26.3
Panel Thickness:1.2 3.5
Mounting Hole
11.3 -0
+0.1
Hex.12.7
10.3
P/N
12.7 1.4
Finish Shell Ag Ni Contact Ag Ag
UG-625/U UG-625/U-Ni
1.5 12.6 26.3
Panel Thickness:1.2 3.5
Mounting Hole
11.3 -0
+0.1
Hex.12.7
10.3
P/N
14.3 1.1
Finish Shell Ag Ni Contact Ag Ag
UG-604/U UG-604/U-Ni-1
1.0 13.7 26.3
Panel Thickness:0.7 2.4
Mounting Hole
9.6 -0
+0.1
8.5 -0
+0.1
10
BNC Series
Unit : mm
Bulkhead Receptacle
Hex.12.7
P/N
14.5 1.3
Finish Shell Ag Ni Contact Ag Ag
Note Moisture-Proof Type with flange and O ring Moisture-Proof Type with flange and O ring
UG-657/U UG-657/U-Ni
2.44 15.1 33
Panel Thickness:2.2 6.0
Mounting Hole
9.92
+0.1 -0
8.8 -0
+0.1
Hex.12.7
P/N
12.7 1.6
Finish Shell Ag Ni Contact Ag Au
UG-1094/U UG-1094/U-D1
1.2 11.9 27
Panel Thickness:2.2 3.1
Mounting Hole
9.6
+0.1 -0
Hex.12.7
8.8 -0
+0.1
P/N
14.5 1.3
Finish Shell Ag Ni Contact Ag Ag
Note Moisture-Proof Type with flange and O ring Moisture-Proof Type with flange and O ring
BNC-RBP1 BNC-RBP1-Ni
2.5 15.2 32.6
Panel Thickness:2.6 6.4
Mounting Hole
9.6 -0
+0.1
8.5 -0
+0.1
11
BNC Series
Unit : mm
Bulkhead Receptacle
Hex.12.7
P/N
14.4 14.7 1.1
Finish Shell Ag Ni Contact Ag Ag
Note with flange and O ring with flange and O ring
BNC-RB BNC-RB-Ni
2.3 17.4 33
Panel Thickness:2.2 7.0
Mounting Hole
9.6 -0
+0.1
8.5 -0
+0.1
12
BNC Series
Unit : mm
Cap
A
P/N BNC-C BNC-C-Ni
57
Finish Ag Ni Ag Ni Ag Ni
A 17.9 17.9 18.5 18.5 17.8 17.8
CW-123A/U CW-123A/U-Ni BNC-CS BNC-CS-Ni
3. 7
P/N BNC-JC
20.5
Finish Ag Ni
BNC-JC-Ni
90
13

▲Up To Search▲

Price & Availability of BNC-P-3C-CR10-BOOT

	To Download BNC-P-3C-CR10-BOOT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .